GetFace IP
Flush installation - Frame - 3 modules
ZVP-FFRA3
Assembly instructions
© Zennio Avance y Tecnología S.L.
Ed. 1
For more info
Page
1
/
2
Note:
This product must be purchased together with the frame ZVP-FBOX3
ASSEMBLY OF FRAME (ONE-COLUMN LAYOUT)
1
Please remove the blind panels and the additional modules. After
that, assemble the additional module enclosures, opening the gaps
previously. Then, fix the assembly using the supplied parts and screws.
Move the microphone to the lower enclosure and place the metallic
parts supplied with the frame.
2
Place the assembly inside the flush-mount box and recover the
cables. Fix the module with the screws (included).
3
Connect the cables to the basic unit and interconnect the additional
modules with the bus as shown in the schema.
4
Fix the blind panel (or additional modules that remain in sight) with
the supplied screws and put the labels with captions next to the buttons.
5
Place the frame.
6
Fix the frame by using the supplied Allen key.
