ZoningBOX 6 / ZoningBOX 4
Technical Support:
14
The parameters in this part depend on the Operating Mode:
Open/Close Mode
: If enabled, the “
[Unit x] Bypass
” one-bit object will be
available, which must be linked to the analogous object of the interface that
controls such valve.
Positional Mode: the option to set the bypass as an extra grill of the
installation or as a specific area of the installation will be displayed.
➢
Bypass Mode
[
Damper mode
/ Zone Mode
]: defines the operational
bypass mode when positional mode is enabled.
When
“Damper mode” is selected, the
Desired Position
[
0…
100
%
]
parameter will be displayed. It defines which position the bypass will take
when the open condition is met
. Also, the “
[Unit x] Bypass
” 1-Byte object
will be available, so it can be linked to the analogous object of the interface
that controls such valve.
Figure 10.
Bypass
– Damper mode
Selecting
“Zone Mode” the following parameters will be displayed:
Figure 11
. Bypass
– Zone mode
•
Bypass Zone
[
1
…m
] (m = number of grilles configured in group n): sets
the zone which will actuate as bypass.
•
Desired Position with Demand
[
0…
100
%
]: opening of the grill which
actuates as bypass when it is an enabled zone and with demand.
