Zennio Z70 v2, Руководство пользователя

Страница: 99 / 126

Z70 v2
http://www.zennio.com Tecnical Support: http://support.zennio.com
99
The GetFace IP does not manifest the call rejected, so the call continues from the point
of view of the visitor.
Open Door : sends the door opening order via an HTTP command and, as configured in
sections 2.1.11.1.1 and 2.1.11.1.2, a communication object. Besides all other
synchronized screens will be notified that the call has been answered, although the call
will remain in progress.
Note: Configuring automatic door opening when receiving a call is possible (see section
2.1.11.1.1 and 2.1.11.1.2)
Exit : the incoming call dialog is closed but no notification is sent to the bus, so the call
will continue on the rest of the synchronized screens.
Mute Call : mutes the call ringtone in Z70 v2 and the rest of the synchronized screens
will be notified.
ONGOING CALL
When accepting the incoming call, Z70 v2 shows the interface in Figure 100 and starts the voice
communication with the GetFace IP.
Figure 100. Ongoing call
During an ongoing call the functions available are:
Hang up Call : ends the communication and closes the ongoing call dialog.
Open Door : sends the door opening order via an HTTP command and, as configured in
sections 2.1.11.1.1 and 2.1.11.1.2, a communication object.