Z70 v2
36
“Call Rejected” Label
[
CALL REJECTED
]: text to be displayed when the call is rejected
on a synchronised device.
Default Ringtone
[
Ringtone 1
/ … / Ringtone 7
]: melody played by Z70 v2 when
receiving a call from an video intercom. The tone can be changed from the configuration
page (see section 2.2.1.2.3) or through the "
[VoIP] Video Intercom Ringtone
" object.
Numer of Tones
[
0…
3
…10
]: set how many times will sound the ringtone.
Play Ringtone Object Value
[
1 = Play Ringtone
/ 0 = Play Ringtone
]: define the polarity
of
“[VoIP] Play Video Intercom Ringtone”
object.
Generic Outdoor Unit
[
disabled
/enabled
]: checkbox that enables a new tab with the
same name in the left menu where the generic outdoor unit is configured (see section
Outdoor Unit n
[
disabled
/enabled
]: checkbox that enables a new tab with the same
name in the left menu where each video intercom is configured (see section 2.1.11.1.1).
2.1.11.1.1
Outdoor Unit n
The video intercom used can be of two types:
private
or
community
. The main difference
between them is that
community
video intercom does not enable the camera image to be
viewed if there is no incoming or ongoing call. In case the unit does not have a camera, the
images will not be viewed in case of any event, no matter what type of video door phone it is.
Each outdoor unit enables the setting of up to 4 doors, whose opening can be executed by
means of an
HTTP command
(it is possible to enable secure opening with username and
password) sent to the outdoor unit and/or a
communication object
sent directly to the actuator.
It is also possible to enable the sending of a KNX object to the bus each time the door is opened.
ETS PARAMETERISATION
After enabling any of the
outdoor units
(see section 2.1.11.1), a new sub-tab "Outdoor unit n"
is displayed with the following parameters:
Name
: text field identifying the parameterised outdoor unit. This name will be displayed
both in the Z70 v2 call log and on the top bar of incoming and ongoing calls.
Type
[
Private
/ Community
]: The “Private” type enables access at any time to the
visualization of images from the camera of the outdoor unit.
