TMD-Display One
Technical Support:
http://zennioenglish.zendesk.com
62
2.4
DISPLAY
2.4.1
CONFIGURATION
TMD-Display features a monochromatic
1.8’’ 128x64 pixel back-lit screen
with black
background and white icons and fonts.
This screen can show useful information to the user, related to the current state of
other devices or of its own controls.
The information provided by the display can consist in icons (with a resolution up to 28
x 22 pixels) or alphanumeric characters (texts). Please refer to the specific document
“
Icons in TMD-Display One
” (available at the Zennio homepage,
) to
see the list of available icons..
Figure 51
Some icons from TMD-Display One.
Three
different font sizes
for the alphanumeric characters are available:
Small
,
Big
and
Extra
(this one only for numeric characters).
As TMD-Display One offers the user a sole control page (instead of alternating,
browsable pages), all the content of the display is shown permanently. It only gets
hidden when the screensaver or some other special messages (welcome, locking or
cleaning) are superimposed.
The screen is divided into 4 zones (
single
boxes –or
big
boxes-), named “a”, “b”, “c”
and “d”, each of which can be further divided into two
double
boxes –or small boxes–.
Each box consists of two areas:
Lower area, where the box name (configurable through the parameter
Label
)
is represented, with the Small text size. The text length depends on the box
size: maximum 12 characters for big boxes and 6 characters for small boxes
(if the text does not fit in the box, it will be truncated). If this label is left empty,
then the indicator fills the box.
