Touch-MyDesign
Technical Support:
http://zennioenglish.zendesk.com
4
Light indicator (LED)
for every button or control, with the possibility of
making the light status depend on the control status.
Buzzer
for an audible acknowledgement of user actions, with the possibility of
disabling it either by parameter or by object.
Possibility of
locking / unlocking the touch panel
through binary orders or
scenes, and of setting a timed/automatic locking of the device.
Welcome Back object
(binary or scene), which will be sent to the bus on the
first press of the touch panel after a long standby period.
Two analogue/digital inputs
(for movement sensors, temperature probes,
additional switches, etc.).
Thermostat
function.
Built-in
temperature sensor.
1.2
INSTALLATION
Figure 2
Touch-MyDesign. Installation process.
To install the device, it is first necessary to mount the metallic plate into a
square/round standard appliance box through the corresponding screws. Next, Touch-
MyDesign is connected to the KNX bus through the corresponding terminal on the rear
side of the device, and then the input terminal is as well connected to the rear of the
device.
1
2
3
4
