Zennio MAXinBOX 66, Руководство пользователя

Страница: 19 / 27

MAXinBOX 66
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
19
ANNEX I. COMMUNICATION OBJECTS
“Functional range ” shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any use or have a particular meaning
because of the specifications or restrictions from both the KNX standard or the application program itself.
Number Size I/O Flags Data type (DPT) Functional Range Name Function
1 1 Bit C T - - - DPT_Trigger 0/1 Reset 0 Voltage Recovery -> Sending of 0
2 1 Bit C T - - - DPT_Trigger 0/1 Reset 1 Voltage Recovery -> Sending of 1
3
1 Bit E C - - W - DPT_Switch 0/1 Manual Control Lock 0 = Lock; 1 = Unlock
1 Bit E C - - W - DPT_Switch 0/1 Manual Control Lock 0 = Unlock; 1 = Lock
4 1 Byte E C - - W - DPT_SceneControl 0-63; 128-191 [Thermostat] Scene Input Scene Value
5, 35, 65, 95 2 Bytes E C - - W - DPT_Value_Temp -273.00 - 670760.00 [Tx] Temperature Source 1 External Sensor Temperature
6, 36, 66, 96 2 Bytes E C - - W - DPT_Value_Temp -273.00 - 670760.00 [Tx] Temperature Source 2 External Sensor Temperature
7, 37, 67, 97 2 Bytes S C T R - - DPT_Value_Temp -273.00 - 670760.00 [Tx] Effective Temperature Effective Control Temperature
8,38, 68, 98 1 Byte E C - - W - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building Protection
[Tx] Special Mode 1-byte HVAC Mode
9, 39, 69, 99
1 Bit E C - - W - DPT_Trigger 0/1 [Tx] Special Mode: comfort 0 = Nothing; 1 = Trigger
1 Bit E C - - W - DPT_Switch 0/1 [Tx] Special Mode: comfort 0 = Off; 1 = On
10, 40, 70, 100
1 Bit E C - - W - DPT_Trigger 0/1 [Tx] Special Mode: standby 0 = Nothing; 1 = Trigger
1 Bit E C - - W - DPT_Switch 0/1 [Tx] Special Mode: standby 0 = Off; 1 = On
11, 41, 71, 101
1 Bit E C - - W - DPT_Trigger 0/1 [Tx] Special Mode: economy 0 = Nothing; 1 = Trigger
1 Bit E C - - W - DPT_Switch 0/1 [Tx] Special Mode: economy 0 = Off; 1 = On
12, 42, 72, 102
1 Bit E C - - W - DPT_Trigger 0/1 [Tx] Special Mode: protection 0 = Nothing; 1 = Trigger
1 Bit E C - - W - DPT_Switch 0/1 [Tx] Special Mode: protection 0 = Off; 1 = On
13, 43, 73, 103 1 Bit E C - - W - DPT_Window_Door 0/1 [Tx] Window Status (input) 0 = Closed; 1 = Open
14, 44, 74, 104 1 Bit E C - - W - DPT_Trigger 0/1 [Tx] Comfort Prolongation 0 = Nothing; 1 = Timed Comfort
15, 45, 75, 105 1 Byte S C T R - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building Protection
[Tx] Special Mode Status 1-byte HVAC Mode
16, 46, 76, 106 2 Bytes E C - - W - DPT_Value_Temp -273.00 - 670760.00 [Tx] Setpoint Thermostat Setpoint Input