Zennio MAXinBOX 66, Руководство пользователя

Страница: 18 / 31

MAXinBOX 66
http://www.zennio.com Technical Support: http://support.zennio.com
18
Number of State Objects : defines the number of 1-bit status objects
required. The minimum (and default) value is “1”, and the maximum is “12”.
These objects are called “
[ML] Status Object n
”.
In addition, the general status object (
“
[ML] General status
”) will always be
available in the project topology. It will be sent to the bus with a value
of “1”
whenever there is at least one of the above state objects with such value.
Otherwise (i.e., if none of them has a value of “1”), it will be sent with a value
o
f “0”.
Trigger Value :
sets the value (“0”, “1” or “0/1”, being the latter the default
option) that
will trigger, when received through “
[ML] Trigger
”, the master
action (the general switch-off or the courtesy switch-on).
General Switch-Off .

Delay : defines a certain delay (once the trigger has been received) before
the execution of the general switch-off. The allowed range is 0 to 255
seconds.

Binary Value :
if checked, object “
[ML] General Switch-off: Binary
Object
” will be enabled, which will send one “0” whenever the general
switch-off takes off.

Scaling :
if checked, object “
[ML] General Switch-off: Scaling
” will be
enabled, which will send a percentage value (configurable in “
Value
”)
whenever the general switch-off takes off.

Scene : if checked, o
bject “
[ML] General Switch-off: Scene
” will be
enabled, which will send a scene run / save order (configurable in
“
Action
”
and “
Scene Number
”) whenever the general switch-off takes off

HVAC :
if checked, object “
[ML] General Switch-off: HVAC mode
” will be
enabled, which will send an HVAC thermostat mode value (configurable in
“
Value
”, being the options “Auto”, “Comfort”, “Standby”, “Economy” and
“Building Protection”) whenever the general switch-off takes off
Note : the above options are not mutually exclusive; it is possible to send
values of different nature together .