KLIC-DD
Technical Support:
20
It is advisable not to show the
object “
Modified Temperature
” as indicator since this
advanced climate management must be transparent to the user. For this reason, the
object “
Temperature Reception
” always indicates the temperature sent through the
“
Temperature Sending
” object.
3.2.8
LOGICAL FUNCTIONS
This module makes it possible to perform numeric and binary operations to incoming
values received from KNX bus, and to send the results through other communication
objects specifically enabled for this purpose.
KLIC-DD can implement up to
5 different and independent functions
, each of them
entirely customisable and consisting in
up to 4 consecutive operations
each one.
The execution of each function can depend on a configurable condition, which will be
evaluated every time the function is triggered through specific, parameterizable
communication objects. The result after executing the operations of the function can also
be evaluated according to certain
conditions
and afterwards sent (or not) to the KNX
bus, which can be done every time the function is executed, periodically or only when
the results differs from the last one.
Please refer to the “
Logic Functions
” user manual (available within the KLIC-DD
product section at the Zennio homepage:
) for detailed information
about the functionality and the configuration of the related parameters.