IRSC Plus
Technical Support:
6
Once IRSC is connected and properly parameterised, it will be possible to control the
A/C unit from within the installation (for instance, from the InZennio Z38i or InZennio
Z41 touch panels), thus achieving an easier and more intuitive control.
Note:
only one air conditioning unit may be controlled by each IRSC.
To obtain detailed information about the technical features of IRSC, as well as on
security and installation procedures, please refer to the device Datasheet, provided
with the original packaging of the device and also available at
1.3
THE IRSC PLUS APPLICATION PROGRAM
The IRSC Plus application program has been developed to control
common air
conditioning systems
via IR commands.
This application allows sending control orders to the A/C system through
infrared
commands
, with IRSC acting as a KNX-IR interface, as explained in Section 1.1.
The IR commands required to control the different air conditioning systems have been
already preset in the application. It is only necessary to check the IRSC Plus
correspondance table
, available at
, in order to identify the
remote control model associated to the system.
Important note:
there are two available versions of IRSC Plus: 6.12 and 8.0. Please,
check if the remote control wanted to be emulated with IRSC Plus is available for the
version in use. This information is available in the Correspondence Table for IRSC Plus
at
. In case it were needed to change the current version, just
configure and download the right version (please note that a version change might last
for several minutes).
