IRSC Plus
Technical Support:
23
Figure 13
Switch-on and Switch-off orders
This way, sending switch-on and switch-off orders through the ON/OFF object makes it
possible to check the effect, over the receiver device (ZAS, InZennio Z38i, ACTinBOX
Hybrid, ACTinBOX MAX6 or ACTinBOX QUATRO), of the signals generated by the
emitter, and therefore whether IRSC Plus is behaving anomalously or not.
Important
:
it is highly advisable to locate the IRSC Plus infrared transmitter in front of
the optimal reception point in the receiver. In case of using an ACTinBOX actuator as a
receiver, the transmitter should be directly attached to the device housing
.
ON
OFF ON
OFF
