Installation instructions
Heat meter zelsius
®
... because every drop of water counts.
ZENNER GmbH & Co. KGaA; Römerstadt 4; 66121 Saarbrücken; Germany
Tel.: +49 (0) 681 / 99676-0; Fax:
681 / 64394
www.zenner.de; [email protected]
+49 (0)
N
o
98W037_230404_GB
Subject to change, errors excepted!
Installation instructions
Heat meter zelsius
®
ZENNER GmbH & Co. KGaA; Römerstadt 4; 66121 Saarbrücken; Germany
Tel.:
681 / 99676-0; Fax:
681 / 64394
www.zenner.de; [email protected]
+49 (0)
+49 (0)
N
o
98W037__230404_GB
General Information
he respective
installation instructions
carefully.
The maximum heating water temperaturemay not exceed 90 °C.
Before installing, compare the content of the package with the packing list.
The installation of the measuring capsule basically takes place in a already
mounted single pipe connection piece (EAS). Please read t
(Installation instructions No. 96W006 for the Zenner
Installation Set WMZ Compact)
Coaxial-Measuring Capsule Heat
Meter for Symmetrical Installation
Qn 2,5 / 1,5 / 0,6 m³/h
Installing the Measuring Capsule
Before installing flush system thoroughly,
release or empty pressure and close
valves in front of and behind the EAS (4).
Use only new and flawless sealing
material. Checksealing surfaces on
measuringcapsule and EAS for damage.
Screw out overflow cap (2) or existing
measuringcapsule.
Remove old profile seal and insert new
one (3) into EAS (4) with the flat side up.
Clean the sealing surface beforehand!
Remove the protective cap (1) from the
new measuring capsule (5) and then
screw into the EAS (4).
Tighten measuring capsule up to the
metallic stop with a hookwrench (for
example: according to DIN 1810A, 68-75
mm).
2)
!
"
#
Packing list
Content
Order No.
1
Measuring capsule zelsius
®
incl. temperature sensors
according to model
1
Sealing set
3 x Self-locking seal
3 x Locking wire
60 W 307
1
Profile seal
60 A 141
... because every drop of water counts.
Subject to change, errors excepted!
General Information
The installation of the measuring capsule basically takes place in a already
mounted single pipe connection piece (EAS). Please read the respective
installation instructions (Installation instructions
96W006 for the Zenner
Installation Set WMZ Compact) carefully.
The maximum heating water temperaturemay not exceed 90 °C.
Before installing, compare the content of the package with the packing list.
No.
Coaxial-Measuring Capsule Heat
Meter for Symmetrical Installation
Qn 2,5 / 1,5 / 0,6 m³/h
Installing the Measuring Capsule
Before installing flush system thoroughly,
release or empty pressure and close
valves in front of and behind the EAS (4).
Use only new and flawless sealing
material. Checksealing surfaces on
measuringcapsule and EAS for damage.
Screw out overflow cap (2) or existing
measuringcapsule.
Remove old profile seal and insert new
one (3) into EAS (4) with the flat side up.
Clean the sealing surface beforehand!
Remove the protective cap (1) from the
new measuring capsule (5) and then
screw into the EAS (4).
Tighten measuring capsule up to the
metallic stop with a hookwrench (for
example: according to DIN 1810A, 68-75
mm).
2)
!
"
#
Packing list
Content
Order No.
1
Measuring capsule zelsius
®
incl. temperature sensors
according to model
1
Sealing set
3 x Self-locking seal
3 x Locking wire
60 W 307
1
Profile seal
60 A 141
