19
18
Additional Features
Auto Flip
Automatically reverses the picture to the correct orientation.
You can install this TV right side up, upside down, or
under a cabinet. If needed, the TV will reverse the picture
for the viewer. Select On in the menu.
Vertical Flip
When this function is on, the picture is flipped over up-
down and left-right.
Horizontal Flip
When this function is on, the screen is flipped over left
and right.
Sleep Timer
Sleep timer automatically turns the TV off and switches it
to standby mode after the preset time expires. Press the
SLEEP button to select the number of minutes before
turnoff.
The display will appear on the screen, followed by 0, 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to
count down from the number of minutes selected.
Note : a. To see remaining sleep time, press the SLEEP
button once.
b. To cancel sleep time, press the SLEEP button
repeatedly until the display shows "0".
ST/SAP
Press the ST/SAP button.
You can select the Sound output system-Stereo, Mono
and SAP and the language during dual language broadcast.
120
B
zenith
Original Picture
zenith
Vertically Flipped Picture
zenith
Horizontally Flipped Picture
21
Additional Features
TV, COMPONENT, VIDEO and S-VIDEO Sources
Available picture and sound sources connected to the TV.
External equipment inputs: VIDEO or S-VIDEO mode are
used for video devices like VCRs, DVDs, etc.),
COMPONENT, is used for component type devices.
Note : If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENU button.
2. Select the Special menu.
3. Use the CH
x
xy
y
button to select the Input option.
4. Use the VOL
Ï
Ïq
q
button to select;
TV, COMPONENT, VIDEO and S-VIDEO.
COMPONENT : Device connected to the COMPONENT
INPUT jacks.
VIDEO : VIDEO device connected to the TV’s VIDEO input.
S-VIDEO : S-VIDEO device connected to the TV’s S-VIDEO
input.
Note : You can also select the TV, COMPONENT, VIDEO,
or S-VIDEO sources using the TV/AV button.
Auto sleep
With Auto Sleep set to On the TV will automatically switch
itself to standby mode approximately ten minutes after a
TV Channel stops broadcasting.
1. Press the MENU button.
2. Select the Special menu.
3. Use the CH
x
xy
y
button to select Auto sleep.
4. Use the VOL
Ï
Ïq
q
button to select On.
5. Use the TV/AV button to return to normal TV viewing.
Blue background
Channels without a program signal appear in blue.
POWER
SSM
C
VOL
VOL
B
MENU
CC
MEMORY SLEEP
TV/AV
ST/SAP Q.VIEW
PSM
OK
CH
W
CH
V
▲▼
:
Move
###### ◀▶
:
Adjust
MENU:Return
#####
TV/AV:Exit
Special
Input
TV
Auto sleep
Off
Blue back
Off
Auto flip
Off
Vertical flip
Off
Horizontal flip
Off