Zenith D52WLCD Series, Инструкция по установке и эксплуатации, Гарантия, Страница: 25 / 60

P A G E 2 5
206-03816
PIP/POP/SPLIT Sources
Press the PIP button on the remote con-
trol in PIP mode to activate POP (Picture
-out-of-Picture) mode.
Press the EXIT button to exit POP mode
or press the PIP button again to activate
Split mode.
Use the LEFT/RIGHT arrow in Split mode
to select CH+/-, Swap, or Source.
• CH+/- Use the UP/DOWN arrow to
select a program for the sub picture.
You can also use pipch-/+ button on
the remote control to change channels
for the sub picture.
Changing programs in the sub picture
is only possible if the sub picture
source is a standard NTSC RF signal.
To change the program for the main
picture, use ch +/- button.
• Swap Use the UP/DOWN arrow button
to swap main and sub pictures. You
can also use swap button on the
remote control to exchange main and
sub pictures.
• Source Use the UP/DOWN arrow to
select a source for sub picture.
Your choices are: TV, Video1 - 2, Front
video.
RGB
- HD/STB , RGB-PC and Component
1 - 2 input cannot used for the sub
picture source.
Press the EXIT button to exit Split mode.
3
4
2
1
1 2 3
4 5 6
7 8 9
0
tv
mode light power
antenna
video front
comp1 rgb
vcr cable dvd sat
mute
swap pipch- pipch+ pip
menu
record stop
pause rew
play ff
exit
flashbk surf
freeze
vol ch
ratio
comp2
skip
source
enter
2/4
3
3
1/2
Press the FREEZE button to capture and freeze the
sub picture image in PIP or Split mode.
Do not display a fixed image on the screen for long
periods of time.
Source Swap CH+/-
3