CH 12-FOX
10:55
STEREO
3373-O
O P E R AT I O N T V F U N DA M E N TA L S
P A G E 1 3
Introducing
you to the
basics of your
Entertainment
Machine.
Basic Television Operation
The source button (TV/VCR/Source) on the remote switches between Video
input and Cable/Antenna input. On some models A/V input is designated
as a channel that is one below the lowest/one above the highest.
You’ll have to use the Channel Up/Down buttons to access it. The
Time/Channel display will read “Video” in place of a channel number.
Cable/Antenna Input: This setting allows you to change cable or
antenna channels and to view videocassettes on channel 3 (or 4) in mono
sound.
Video Input: This setting allows stereo playback of videocassettes. The
television cannot change channels in the Video mode, but the VCR can.
To view the current input source, press ENTER on your remote. The
Time/Channel display should appear in the upper right-hand cor-
ner of the screen. If the display reads ‘Video,’ then the source is
an A/V input. If the display reads a channel number, then the
source is your Cable or Antenna.
CHANNEL UP/DOWN arrows: Use these arrows to change the channels.
Auto Program will have found all channels available to you.
NUMBER Key Pad: To skip to any channel, enter the number of the
channel using the NUMBER key pad, then press ENTER.
FLASHBACK: To instantly return to the last channel viewed,
press FLASHBACK.
SURF: Switches between the primary channel selection and your cus-
tomized surf menus. The surf mode will appear in the lower right corner
of your screen.
Volume Right/Left: To adjust the volume level, use the volume Right/Left
arrows. To soften the volume of your TV, press MUTE once. To silence your
TV instantly, press MUTE twice. To get the sound back, press MUTE again.
Source
Channel Changing
Audio
Channel or Video
(Indicates Source)
Time
Audio Mode
Date
This is an example of the Time/Channel
display that appears in the top right and
left corners of your screen.
SURF 1
DEC/11/98
