Zenit JS-1050M, Инструкция по эксплуатации

Страница: 5 / 10

5
technical specifications
Model Js-1050 M
Rated voltage 220-240 V
Rated frequency 50-60 Hz
Rated power 1050 W
Cutting depth:
in wood 65 mm
in metal 8 mm
Cutting angle: 0-450
Speed 500-3000 spm
applications
Cutting various lumber and pocket cutting.
Cutting mild steel plate, aluminum plate, and copper plate. Cutting plastics, such as
phenol resin and vinyl chloride. Cutting thin and soft construction materials.
Cutting stainless steel plate.
prior to operation
1. Power source.
Ensure that the power source to be utilized conforms to the power requirements speci-
fied on the product nameplate.
2. «On\Off» switch.
Ensure that the power switch is in the OFF position. If
the plug is connected to a receptacle while the power switch is in the ON position, the
power tool will start operating immediately, inviting serious accident.
3. Extension cord.
When the work area is removed from the power source. Use an extension cord of
sufficient thickness and rated capacity. The extension cord should be kept as short as
practicable.
4. Dust
Dust created by power sawing can cause damage to health. One of the following ways
is recommended:
а) using dust mask
б) using dust suction equipment.
When using suction equipment connect adaptor with hose of the dust suction equip-
ment.
5. Changing blades