ZENEC ZEM-560U, Инструкция по эксплуатации, Страница: 4 / 12

4
video
(yellow)
DVD-Headunit
6-pin
connector
To +/-12V
power supply (or car ignition)
black
red
In-line fuse
AV-
Interface
audio
(red)
5.6" UNIVERSAL
LCD MONITOR
CONNECTION SCHEMATIC
CONNECTIONS / INPUTS & OUTPUTS
A/V Interface (Black Box): The ZENEC ZEM-560U comes with an A/V interface black-
box, that features the following in- and ouputs:
e Extension lead with 6-pin pc-plug for connection of the TFT monitor
e
A red* and a black power supply wire to be connected to the on board voltage of the
vehicle. The red wire with inline fuse holder should be connected to the ignition of the
vehicle, to avoid unnecessary current drain when the vehicle is not in use.
e Two separate RCA output plugs (red and yellow), to be connected to the audio/video
source.
* the read power wire features an inline fuse holder – the correct fuse rating is 250V/2A –
only use the correct fuse rating or the monitor and the video electronics could be dama-
ged!
ZEM-560U Manual 12.09.2003 10:00 Uhr Seite 4