ZENEC ZE-NC514, Руководство пользователя

Страница: 19 / 148

ZE-NC514
19
DISC MODE
REPEAT PLAYBACK
■
Press the [RPT] key on the remote control repeatedly or open the onscreen control
buttons menu and then touch the [ ] button repeatedly to alter repeat mode according
to the following table.
Disc type Repeat mode
DVD Repeat Chapter
→
Repeat Title
→
Repeat Off
VCD (PBC off) Repeat Single
→
Repeat All
→
Repeat Off
CD Repeat Single
→
Repeat Off
MP3/WMA Repeat Single
→
Repeat Folder
→
Repeat Off
MPEG Repeat Single
→
Repeat Folder
→
Repeat Off
Picture Repeat Single
→
Repeat Folder
→
Repeat Off
NOTES:
■
When a VCD is played back, this function is prohibited if the PBC function is active.
■
Turning off the power or switching playing source to other modes and back will cancel
this function.
REPEAT A-B
■
When a DVD, VCD or CD disc is played back, you can play back the contents between
the time points from A to B repeatedly.
■
Press the [RPT A-B] key on the remote control or open the onscreen control buttons
menu and then touch the [A-B] button to set the start point (A) of the repeated section.
Do the above operation again to set the end point of the repeated section. The selected
portion will repeat continuously.
■
Do the above operation for the third time to cancel this function.
RANDOM PLAYBACK
■
When this function is on, the contents in the disc will be played back randomly.
■
Press the [RDM] key on the remote control repeatedly or open the onscreen control
buttons menu and then touch the [ ] button repeatedly to alter random playback mode
among 'Random', 'Random repeat', 'Repeat Off'.