ZENEC Prime Z-EMAP66 Series Скачать руководство пользователя

Страница: 14 / 82

Navigation

menu

By tapping it, you can open the Navigation menu, where you

can reach other parts of ZENEC.

Street name

It shows the current street name. By tapping it, you can open

the

Where Am I

screen. See page 65.

3D objects

They display hills, mountains, roads, landmarks, and buildings

in 3D.

If you are approaching a motorway exit or a complex intersection and the needed information

exists, the map is replaced with a 3D view of the junction. See page 18.

When entering a tunnel, the map is replaced with a generic tunnel image. See page 18.

1.3.1 Streets and roads

ZENEC shows the streets similarly to paper road maps. Their width and colours correspond

to their importance; you can easily tell a motorway from a small street.

1.3.2 GPS position markers

When your GPS position is available, ZENEC marks your current position. By default, this

marker is a blue arrow. The dot near the arrow shows the GPS position as perceived by the

GPS receiver.
When on-road navigation is selected, the current position marker may not show your exact

GPS position and heading. If roads are near, it is aligned to the nearest road to eliminate GPS

position errors, and the direction of the icon is aligned to the direction of the road.
If you select off-road navigation, the current position marker is at your exact GPS position.

The direction of the icon shows your current heading.

Содержание Prime Z-EMAP66 Series


















































































Результаты поиска

Содержание Prime Z-EMAP66 Series

Отзывы:

Похожие инструкции для Prime Z-EMAP66 Series

Бренды по названию

Популярные бренды

ZENEC Prime Z-EMAP66 Series, Руководство пользователя

Результаты поиска

Содержание Prime Z-EMAP66 Series

Отзывы:

Похожие инструкции для Prime Z-EMAP66 Series

Бренды по названию

Популярные бренды