© 2020 Zen-Me Labs Ltd. Zen-Me is patented and trademark of Zen-Me Labs Ltd.
PAGE 5
The sensor will not charge when the ambient temperature is outside the approved charging temperature range of 0°C to 45°C (32-113°F).
NOTICE
Do not place any object other than the sensor onto the wireless
charger as this could damage the device.
Do not try to charge the sensor with accessories attached. This will
damage the charger and sensor.
NOTICE
Battery Level
The sensor monitors the battery level and provides status information when connected to the Zen-Me App. Monitor battery status on the
Sensor page of the Zen-Me App. If the status shows a “battery critical” warning, charge the sensor immediately.
The sensor will not send “battery critical” status information if outside wireless range or unable to connect to the Zen-Me App. This could
result in the sensor battery discharging fully without warning. If this happens the sensor will send notification when it recharges and
reconnects to the Zen-Me App.
If the sensor does not respond, the most common cause is that the battery has run out. Check the battery charge by pressing the sensor
Power Button. If the sensor light fades or fails to flash, the battery has discharged completely and must be recharged.
WARNING
To find out if the battery charge is low, press the sensor Power
Button.
If the sensor light fades or fails to flash, the battery charge is very low
and must be recharged.
