Chapter 2: Treatment
COOLTONE User Manual
28
-C
General treatment screen
(1) Program information
This screen shows the selected treatment program
(buttocks, abdominals or thighs).
(2) Remaining treatment time
Graphically displays the course of treatment.
(3) Start/ Stop
By pressing the button
“Start,” the treatment starts
and the button changes into
“Stop.” Pressing the
button again stops the treatment.
(4) Intensity of Applicator A
To adjust the intensity of applicator A only, check
that the button
“Synced” is not activated. If the button
is not activated,
it shows “Sync” instead of “Synced”.
Otherwise press the
“Synced” button to deactivate it
and change back to “Sync.” Move the yellow button
up and down to change the intensity of the applicator
A in increments of 1 percent. You can also touch the
plus (+) button or the minus (-) button to increase or
decrease the intensity.
(5) Intensity of Applicator B
To adjust the intensity of applicator B only, check
that the button
“Synced” is not activated. If the button
