Treatment
CoolSculpting® Elite
System User Manual
24
CS-UM-CM3-02-EN-D
2. Set up the system
Materials required:
•
Treatment Card
•
Applicator(s)
a. Power on the control unit and wait for the touchscreen to display the “Insert Card” prompt.
b. Insert card into the slot on the control unit and wait a moment while the card authenticates.
Screen should display “Reading Card.”
Example:
DUAL CARD Screen
Example:
Solo CARD screen
Note:
The system displays the number of treatments remaining on the card in the top right area of
the screen. Depending on the type card inserted, the “DUAL CARD” appears if using the
Dual card or “SOLO CARD” if using the Solo card.
Note:
If dual applicator treatment is desired, switch to a Dual card. Also, if Solo applicator
treatment is desired, switch to a Solo card.
