background image

 

INTRODUCTION 

Carl Zeiss 

General information 

Transillumination top 450 mot. 

 
 

 

435500-9000-701 

08/2012 

1

 

INTRODUCTION 

1.1

 

General information 

The  transillumination top  450 mot. has been designed, manufactured and tested in compliance with 
DIN EN 61010-1 (IEC 61010-1) and IEC 61010-2-101 Safety requirements for electrical equipment for 

measurement, control and laboratory use. 
The device conforms to Directives 2006/95/EC “Low Voltage Directive” and 2004/108/EC 
“Electromagnetic Compatibility”. The device is disposed of in accordance with the WEEE Directive 

2002/96/EC.  

It carries the 

 mark. 

The operating manual contains all information and warnings the operator must comply with. 
The following warning and information symbols are used in this operating manual: 

 

CAUTION 

This symbol indicates a potential hazard to the user.

 

 

CAUTION 

Optical radiation is emitted. Do not look into the laser beam!

 

 

This may be harmful to the eyes (see Section 2.3).  

 

CAUTION 

Risk of pinching!

 

 

CAUTION

 

Hot surface!

 

 

CAUTION: High-energy UV radiation!

 

 

Risk of injury to eyes and skin!

 

 

CAUTION

 

Disconnect the instrument from the power supply before opening!

 

 

ATTENTION 

This symbol indicates a potential hazard to the instrument or system.

 

 

NOTE 

This symbol indicates an instruction which requires particular attention.

 

 
 

Содержание Transillumination top 450 mot.



















Отзывы: