Zeiss S88, Инструкция по эксплуатации

Страница: 123 / 182

G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
Operation
123
OPMI
®
VISU 150 / 200: assigning a function to keys C and D of the
foot control panel
Keys C and D of the foot control panel can be configured as required.
In configuration mode 1, the upper and center display boxes enable you
to allocate one of the following functions to keys C and D:
The functions are explained in detail in the following.
FOOT LEFT C:
Use the upper section of the display and key field (FOOT LEFT C:) to as-
sign one of the possible functions to key C of the foot control panel.
FOOT RIGHT D:
Use the middle section of the display and key field (FOOT RIGHT D:) to
assign one of the possible functions to key D of the foot control panel.
Display Function of key C or D of the foot control panel
XY-RES XY recentering and focus ("RESET")
XYZ-RES XY recentering mechanism, focus and zoom
FOC-
MEM Focus memory pressed < 2 sec:
pressed > 2 sec:
triggers position search
saves position
XY-INV inversion of direction of X-Y coupling on control panel
SDI triggers SDI switching
PHOTO triggers a photo at the camera interface
AUX triggers an AUX signal at the AUX interface (see remote con-
trol socket on the connector panel of the suspension
system).
Path: After you have switched on the instrument, the basic mode is auto-
matically displayed.
To access configuration mode 1 from the basic mode, simultane-
ously press the "MODE" and "STORE" keys.
C D
Configuration
mode 1
MODE STORE MANUAL
FOOT
LEFT C:
PHOTO
FOOT
RIGHT D:
PHOTO
SPEED
FUNCT:
HIGH