Zeiss S88, Инструкция по эксплуатации

Страница: 107 / 182

G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
Operation
107
Configuration mode 1 for OPMI Vario (SETTINGS 1)
Configuration mode 1 for the OPMI Vario permits you:
– to assign a function to buttons C and D of the foot control panel,
menu items "FOOT LEFT C:" and "FOOT RIGHT D:"
– to assign a function to the freely configurable handgrip buttons, menu
item "HANDGRIP:"
Assigning a function to foot control panel buttons C and D (OPMI Vario)
Buttons C and D of the foot control panel can be configured as required.
The menu items "FOOT LEFT C:" and "FOOT RIGHT D:" permit you to
assign one of the following functions to buttons C and D:
FOOT LEFT C:
Use the upper display and key field (FOOT LEFT C:) to assign one of the
possible functions to button C of the foot control panel.
FOOT RIGHT D:
Use the middle display and key field (FOOT RIGHT D:) to assign one of
the possible functions to button D of the foot control panel.
Path: After you have switched on the instrument, the basic mode is auto-
matically displayed.
To access configuration mode 1 from the basic mode, simultane-
ously press the "MODE" and "STORE" keys.
Display Function of button C or D of the foot control panel
XY-RES XY recentering ("RESET")
FOC-
MEM Focus memory pressed for < 2 sec:
pressed for > 2 sec:
triggers positioning
saves position
ZOOM-
MEM Zoom memory pressed for < 2 sec:
pressed for > 2 sec:
triggers positioning
saves position
PHOTO Triggering an exposure via the camera interface, i.e. triggers
the shutter of a connected 35 mm camera.
AUX Triggering an AUX signal via the AUX interface, e.g. to
switch an external instrument on or off (see remote control
socket on the connector panel of the suspension system).
AF Triggering the autofocus option
MODE STORE MANUAL
FOOT
LEFT C:
PHOTO
FOOT
RIGHT D:
PHOTO
HAND
GRIP:
LIGHT
Configuration
mode 1
SETTINGS 1
C D
MODE
STORE MANUAL
FOOT
LEFT C:
PHOTO
FOOT
RIGHT D:
PHOTO
HAND
GRIP:
LIGHT
Configuration
mode 1
SETTINGS 1