Zeiss S100, Инструкция по эксплуатации

Страница: 11 / 278

Version 9.0
G-30-1781-en
Page 11
S100 / OPMI pico Safety measures
Duties of the operator
• Only operate the device within the scope of its intended use.
• The device may be operated only by properly instructed and trained
persons. It is the responsibility of the customer or institution operating
the equipment to train and instruct all staff using the equipment.
• Keep the Instructions for Use accessible to the operating personnel at
all times.
• For planning the S100 ceiling support or S100 wall support, follow the
Planning Manual (publication M-30-1385).
• Note the symbols and labels attached to the device (see Page 22)!
• Use only original accessories approved by ZEISS.
Legal regulations • Check regularly that the legal regulations applicable in your country with
regard to accident prevention and work safety are being complied with.
• This device must not be modified without the manufacturer’s approval.
If the device is modified, appropriate examinations and tests must
be performed to guarantee the further secure use of the device.
The manufacturer is not liable for damage caused by unauthorized use
of the device. Furthermore, such unauthorized modifications will render
the warranty and any claims under warranty invalid.
• Modifications and repairs on this device or any equipment operated
together with this device may only be performed by ZEISS SERVICE.
• If required by the regulations and directives applicable in the country of
use, connect the system to a special emergency backup power supply.
Ambient conditions • Do not use the power-operated devices included in the delivery package
– in areas where there is a risk of explosion,
– or at a distance of less than 25 cm from flammable anesthetics or
volatile solvents such as alcohol, benzine or similar substances.
• Do not use or store the device in a damp place. Do not expose the system
to dripping water, running water, sprayed water or splashes.
• Ensure that fluids cannot enter the device.