Zeiss S100/OPMI pico, Инструкция по эксплуатации

Страница: 153 / 278

Version 7.0
G-30-1781-en
Page 153
S100 / OPMI pico Operation
– FREEZE / LIVE
If the current live video image is displayed and the foot switch is pressed,
the live video image is frozen and displayed on the monitor as a freeze
frame. With renewed pressing of the foot switch the live video image is
displayed again.
– USER1 / USER2
(or Endodonty/Treatment or Anterior/Posterior)
You can switch between user 1 and user 2 by pressing the foot switch. If
the current user is neither user 1 nor user 2, user 1 is switched on with the
first activation of the foot switch.
– USER3 / USER4
You can switch between user 3 and user 4 by pressing the foot switch. If
the current user is neither user 3 nor user 4, user 1 is switched on with the
first activation of the foot switch.
– INVERTED / STANDARD (is only required with a special tube)
If the current live video image is displayed and the foot switch is pressed,
the live video image is frozen and displayed on the monitor as a freeze
frame. With renewed pressing of the foot switch the live video image is
displayed again.
You can select under "SWITCHING MODE" if a remote function shall be con-
trolled via a foot switch or a fundus imaging system. The following control
types are available:
– FOOTSWITCH / AUX
Function control is performed via a foot switch.
– FUNDUS SYSTEM
The function is controlled via a fundus imaging system. This setting is only
available under the "OPHTHALMOLOGY" application.
CAUTION Not for ophthalmic examinations!
• The S100 / OPMI pico must not be used for ophthalmological procedures!