Zeiss S100/OPMI pico, Инструкция по эксплуатации

Страница: 103 / 278

Version 7.0
G-30-1781-en
Page 103
S100 / OPMI pico Preparations for use
Setting the suspension arm weight compensation
• Do not perform balance setting until the surgical microscope and all ac-
cessories have been mounted!
• The maximum load on the suspension arm must not exceed 7 kg.
• Loosen the friction adjustment screw (1) of the suspension arm.
• Insert an 8 mm hex key into opening (3) of the articulated joint cover (2).
• Use the hex key to turn balance adjustment screw (4) until balance has
been achieved.
• Check the balance setting in several positions.
• Using the braking screw (1) adjust the required mobility of the lifting
movement of the suspension arm.
Fig. 54: Adjusting the weight
compensation (balance) on
the suspension arm
NOTE Perform the weight compensation
• Perform a weight compensation (balancing) before using the device (not
above the patient and with a secure distance to other persons and devic-
es) so that the surgical microscope remains in its position within the
working area.
CAUTION Risk of crushing - mind your fingers!
Fingers may be crushed in the areas marked with the "Risk of crushing" label.
• Do not touch these areas while the system is being moved or brought in
its working / transport position.
4
3
1
2