Zeiss Primostar 3, Инструкция по эксплуатации

Страница: 82 / 112

5 First Operating Steps | 5.10 Capturing Images and Videos Using the Integrated Smart 8 MP Color Cam-
era
ZEISS
6. To avoid interfering fluorescences (caused by
the transmitted-light LED), place the yellow fil-
ter onto the luminous-field diaphragm (see
In-
serting Color Filters (Full Köhler Stand) [
}
48] )
and close the aperture diaphragm of the con-
denser completely.
Info
If the yellow filter is not available, about 90 % of the interfering fluorescence can be elimi-
nated by closing the condenser aperture diaphragm.
It is also possible to insert the TL cover plate into the slot of the Abbe condenser (see Attach-
ing or Removing Yellow Filter or TL Cover Plate (Fixed Köhler Stand) [
}
47] ).
Info
Our special eyecups with light protection can be used for microscopic examinations in rooms
which are not darkened. They are, however, not suitable for spectacle wearers and must not
be folded over because the required dimensional stability would be lost.
5.10 Capturing Images and Videos Using the Integrated Smart 8 MP Color
Camera
5.10.1 Basic Procedure Using Operator Panel
Prerequisite ü The USB flash drive has been inserted into the USB A port.
Procedure 1. Position your specimen on the microscope and adjust the microscope to see a focused im-
age through the eyepieces.
2. To take a single image, briefly press the Snap button on the camera panel.
à
The image is saved to the USB flash drive in
either JPEG or TIFF format.
3. To start video recording, press and hold the Snap button on the camera panel for about
five seconds.
4. To stop video recording briefly press the Snap button on the camera again.
à
The video is saved to the USB flash drive in MP4 format.
82 Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en