Zeiss Primostar 3, Инструкция по эксплуатации

Страница: 49 / 112

ZEISS 4 Installation | 4.3 Installing Additional Components
4.3.5 Installing the Polarizer Plate (Full Köhler Stand)
Procedure
1. Move the condenser carrier up as far as it will
go by turning the knurled ring for condenser
height adjustment.
2. Unscrew the cover cap from the luminous-field
diaphragm and store it for later use.
3. Put the polarizer plate onto the luminous-field diaphragm.
à The position stop on the polarizer plate has to match with the position stop on the lumi-
nous-field diaphragm.
4.3.6 Installing the Analyzer Plate
Prerequisite ü The microscope is unplugged from the mains power.
Procedure 1. Remove the tube, see Installing or Changing the Tube [
}
43] .
2. Place the analyzer plate into the beam path on the top on stand.
à
The position stop on the analyzer plate has
to match with the position stop on the
stand.
3. Re-attach the tube on the stand.
Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en 49