Zeiss OPMI VISU 160, Инструкция по эксплуатации

Страница: 201 / 234

G-30-1529-en OPMI® VISU 160 on S8, S81 & S88 Suspension Systems Issue 5.0
Printed on 09. 10. 2006
Maintenance / Further information
201
Care of the unit
Warning!
If possible, the systems and accessories should be cleaned immediately
after use. Contaminations should not be allowed to dry on the objects, as
this would make cleaning and disinfecting more difficult.
If possible, machines should be used for disinfecting and cleaning. For
details, please also see the relevant notes on sterilization equipment.
Cleaning optical surfaces
The multi-layer T* coating of the optical components (e.g. eyepieces, ob-
jective lenses) ensures optimum image quality.
Image quality is impaired by even slight contamination. To protect the in-
ternal optics from dust, the system should never be left without the objec-
tive lens, binocular tube and eyepieces. After use, cover the system to
protect it from dust. Always store optical components and accessories in
dust-free cases when they are not being used.
Clean the external surfaces of optical components as required:
Caution:
Do not use any chemical detergents or aggressive substances. These
may damage the optical surfaces.
• Remove coarse dirt (splashes of blood etc.) using distilled water to
which a dash of household dish-washing liquid has been added. Wipe
the surfaces only with a damp, under no circumstances with a wet
cloth.
Any remaining marks can be easily removed using the following aids.
• For thorough cleaning of optical surfaces, use the optics cleaning set
(Cat. No. 1216-071) or damp optics cleaning wipes (available from
specialized dealers).
• Remove minor contaminations such as dust, streaks, etc. using a
clean microfiber cleaning cloth (available from specialized dealers or
under Cat.No. 1254-655).
Auxiliaries from Zeiss: optics cleaning set, Cat. No. 1216-071
Suitable for the cleaning of objective lenses and eyepieces of the surgical
microscope at regular intervals.