Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 84 / 268

Device overview S7 / OPMI PROergo
Version 11.0
Page 84 G-30-1435-en
Instrument tray (option)
The S7 floor stand can be equipped or retrofitted with an instrument tray (1).
In the case of retrofitting, our Service staff or an authorized person will install
the instrument tray on your suspension system.
The instrument tray (1) can carry a maximum of 13 kg. It is designed to
securely carry items such as a video recorder. Further accessories can be
installed on the instrument tray using the strap provided.
NOTE Risk of injury caused by non-observance of the following information!
• Do not exceed the instrument tray’s (1) load capacity of 13 kg.
• Make sure that the accessory equipment is positioned as securely as
possible on the instrument tray.
• Secure the accessory equipment using the two stud bolts on the
instrument tray.
• If required, secure further accessory equipment on the tray using the
strap provided.
• Remember there is a risk of collision and crushing when suspension arm
(2) is folded to its moving position. A "Risk of crushing" warning label is
therefore attached on the left and right of suspension arm (2).
• Please read the relevant Instructions for Use before starting up the
accessory equipment.
• Never pull or push at the accessory equipment (3) in order to move the
floor stand. Always use only the grab handle (4) to move the floor stand.