Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 80 / 268

Device overview S7 / OPMI PROergo
Version 11.0
Page 80 G-30-1435-en
Carrier arm, stand column, stand base
1 Control and display panel
The control and display panel permits you to control all electrical functions
of the S7 floor stand and the surgical microscope.
2 Friction
Knob for adjusting the friction of the carrier arm's swivel movement.
3 Handle
for moving the floor stand. Before relocating the stand, you can hang the
foot control panel and wind up the cables on the lower end of the handle.
4 Connector panel
for connecting the system to line power. Further connectors are provided
for powering peripheral equipment. A foot control panel can be
connected to a multi-point connector.
5 Friction
Knob for adjusting the friction of the suspension arm's swivel movement.
6 Cable clip
for winding up the power cord and the cable of the foot control panel.
7 Bracket for foot control panel
8 Locking tab
For steerable casters (4 pcs).
To secure the stand in position, press down at least two locking tabs.
Press down to lock the caster.
Press up to release the caster.
9 Steerable caster
The four casters roll very smoothly, permitting the unit to be easily
wheeled to the site of use.