Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 217 / 268

Version 11.0
G-30-1435-en
Page 217
S7 / OPMI PROergo Care and maintenance
Device maintenance
Electromagnetic
compatibility (EMC)
No regular inspections or maintenance procedures are required in order to
maintain electromagnetic compatibility (EMC).
Maintenance intervals
Regular preventive maintenance is required in order to ensure safe and correct
operation of the device as well as a long service life.
The following table lists the relevant maintenance activities and shows at
which maximum intervals they must be performed.
The maintenance activities that you are able to perform yourself are described
below.
Any other maintenance activities that is not described here in detail requires
device-specific knowledge.
Please contact your local ZEISS Service or authorized partner to arrange for
the timely performance of these maintenance activities.
Interval Maintenance tasks
Every 2 years Visual inspection and function test of the following modules:
– Suspension system with carrier arm
– Illumination and power supply unit
– Surgical microscope with binocular tube
– Light guide
– Brakes
– Power cord
– Function test of limit of downward travel
– Connected accessories
– Function test of video system (option)
In accordance with
country-specific
requirements
Safety check