Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 215 / 268

Version 11.0
G-30-1435-en
Page 215
S7 / OPMI PROergo Care and maintenance
Cleaning the mechanical surfaces
All of the system's mechanical surfaces can be wiped clean with a damp cloth.
Do not use any aggressive or abrasive cleaning agents.
Remove any residue using a mixture of 50% ethyl alcohol and 50% distilled
water plus a dash of household dish-washing liquid.
Sterilization
Asepsis sets
The asepsis sets available from ZEISS contain rubber caps and hand grips
that can be sterilized in autoclaves. For more detailed information about
sterilization, please refer to the enclosed "Preparation of resterilizable
products" manual for each Asepsis Set.
Sterile drapes (drapes)
Sterile single-use drapes are available to cover the system.
The drapes recommended by ZEISS are listed Page 243 in the section
"Asepsis ordering data".
• Loosely attach the sterile drapes so that there is sufficient space for the
microscope supporting stand and the surgical microscope to move.
CAUTION Risk of infection due to soiled aseptic accessories and drapes!
• Only use sterile asepsis accessories and drapes suitable for the system!
• The products contained in the asepsis sets must be cleaned, disinfected
and sterilized before each use. This also applies to the first use after
delivery.
• Make sure that the operating personnel have been instructed in the
sterile operation of the device.