Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 156 / 268

Preparations for use S7 / OPMI PROergo
Version 11.0
Page 156 G-30-1435-en
1Chip HD camera option
Installing the 1Chip HD camera
Please observe the "1Chip HD camera" Instructions for Use (G-30-1946).
These Instructions for Use are included automatically in systems with the
"1Chip HD camera" option. They contain all the additional explanations for
the "1Chip HD camera" option.
The 1Chip HD camera is flanged permanently to a beam splitter or to an iris
diaphragm for video lenses. Normally the beam splitter with the 1Chip HD
camera remains installed on the surgical microscope.
However, the beam splitter with the 1Chip HD camera can be removed from
the surgical microscope if necessary.
CAUTION Risk of infection due to dangling camera cable!
If the beam splitter and the permanently connected 1Chip HD camera are
removed from the surgical microscope and the remaining, non-sterile camera
cable is hanging down from the surgical microscope, the camera cable could
contaminate the sterile area with pathogens under certain circumstances.
This may cause infections.
•
Make sure that the remaining camera cable is not hanging down from
the surgical microscope.
R508