Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 122 / 268

Device overview S7 / OPMI PROergo
Version 11.0
Page 122 G-30-1435-en
Illumination menu
You can adjust the settings for the following functions in the Illumination
menu:
Intensity:
the illumination intensity from minimum to maximum brightness from
5% to 100% in increments of 5%. This setting can be adjusted for the xenon
illumination and the halogen illumination.
Start at:
the brightness start value. Use one of the arrow buttons ( , ) to adjust the
illumination intensity in percent. The xenon or halogen lamp will then go on
at this brightness level after activation.
The "Start at" field will be active only if "Zoom Link" is in the "Off" position.
If Zoom Link is On, the "Start at" field will not be active. No bar is displayed;
it is not possible to adjust any settings.
Zoom Link:
the automatic light readjustment. When this function is active (ON),
the illumination is adjusted in such a way that the user is provided with
a subjectively constant brightness level in the eyepiece, regardless of the
zoom factor set. Whether the Zoom Link function has been activated or
deactivated is stored in the respective user profile.
• Press the Enter button to save the value set and to return to the "Surgery"
menu. If you do not press any button, the display will automatically jump
back to the Surgery menu after approx. 30 seconds and save the values
set.
Zoom link
Illumination
50 % 50 % On
On
On
On