Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 108 / 268

Device overview S7 / OPMI PROergo
Version 11.0
Page 108 G-30-1435-en
Illumination system
Two different types of illumination are available for the suspension system.
1 Halogen illumination
The halogen light source is equipped with an illumination system for
fiber illumination. The lamp housing contains a backup lamp which
automatically swings into position when the first lamp fails.
2 XENON illumination
The xenon light source is equipped with an illumination system for fiber
illumination. The xenon lamp generates light whose spectrum resembles
that of natural daylight. Regardless of the brightness setting, the color
temperature of the light always remains the same. Normal daylight film
without any additional conversion filters can therefore be used for
photographic documentation. The lamp module contains two xenon
lamps. The second lamp is used as a backup lamp which must be manually
swung into the illumination beam path when the first lamp fails. You have
to pull out the lamp module all the way before being able to swing in the
backup lamp.
CAUTION Risk of injury caused by xenon light in the facial area
Surgery using xenon light in the facial area may seriously harm the patient's
eyes.
• The patient's eyes must not be exposed to xenon light.
• This xenon light source must not be used in ophthalmology.