Zeiss OPMI Lumera i, Инструкция по эксплуатации

Страница: 54 / 184

Device overview OPMI Lumera i
Version 8.0
Page 54 G-30-1720-en
Preconfigured button assignment
Keys The functions of buttons A, B, C, D, E, and F are preconfigured but they can
be re-assigned to meet the user’s specific requirements. The factory settings
are:
– Button A: light intensity
– Button B: light intensity
– Button C: video mode selection (e.g., anterior or posterior)
– Button D: selection of the video image orientation
– Button E: light source on/off
– Button F: light source on/off
Joystick The joystick located between buttons C and D is used to control the X-Y coupling.
Rocker switches The default settings (focus/zoom) of the rocker switches are pre-configured
horizontally or vertically for each country. However, a ZEISS service technician
can change the settings at any time. User-specific settings (see Page 110) can
be made by you at any time.
The horizontal factory settings are:
– Button I: focus
– Button G: zoom
– Button J: focus
– Button H: zoom
The vertical factory settings are:
– Button I: zoom
– Button G: zoom
– Button J: focus
– Button H: focus
B
D
F
A
C
E
I
G
J
H