Zeiss OPMI Lumera i, Инструкция по эксплуатации

Страница: 122 / 184

Operation OPMI Lumera i
Version 8.0
Page 122 G-30-1720-en
• Select the functions to be started when the XY reset button is pressed.
The following functions are available:
– XY Reset
(The X-Y coupling moves to its center position.)
– Focus Reset - always active
(The focusing system moves to its initial position.)
– Zoom Reset
(The magnification is set to its preset start value.)
– Light Reset
(The brightness is set to its preset start value.)
• To save the changes, press the button.

The setting is saved for the current user.
• To return to the Main Menu, press the button 2×.

The main menu is displayed again.
Configuring standby position
The standby position is reached when suspension arm (1) is moved to the
topmost position. This automatically deactivates the light source.
The functions are reset to their stored start values, depending on the settings
made. Proceed as follows for user-specific configuration.
• Select <System Settings><Park Position> in the main menu.

The “Park Position” menu is displayed.
• Select the functions to be performed when the standby position is reached.
The following functions are available:
– XY Reset
(The X-Y coupling moves to its center position.)
– Focus Reset - always active
(The focusing system moves to its initial position.)
– Zoom Reset
(The magnification is set to its preset start value.)
– Light Reset
(The brightness is set to its preset start value.)
1