Zeiss opmi lumera 700, Инструкция по эксплуатации

Страница: 84 / 236

3 Description of the device Instructions for Use
OPMI LUMERA 700 3.5 Functional description
84 / 236 G-30-1673-en - 14.0 - 2018-07-12
Function Effect
Reset focus
position Moves the OPMI focus and internal focus on the
RESIGHT 700 fundus viewing system (if connected) to
their initial positions (center position). This setting
cannot be deactivated. Hence, the button is always
blue.
Reset magnifi-
cation to start
value Resets the total magnification to its configured start
value.
Reset illumi-
nation to start
values Resets the SCI illumination settings and the light
source brightness to their configured start values. The
filter selection is not reset to its configured start
value.
3.5.9 Links
Links can be used to couple various settings with one another.
When one setting is changed, the settings linked to it are
automatically changed as well. The following functions can be
adjusted:
Function Effect
Couple light
intensity of
keratoscope to
light intensity of
OPMI Couples the light intensity of the keratoscope to the
SCI illumination. This link is only available if the
keratoscope ring is installed.
Couple assistant
zoom to OPMI
zoom Couples the zoom system of the assistant’s
microscope to the main microscope's zoom system.
This link is only available if the assistant's microscope
is installed.
Couple XY and
focus speed to
magnification Couples the speed of the XY coupling and focus to
the current total magnification value. This link facili-
tates focusing on object details, as the preset
focusing speed is automatically reduced at higher
magnifications.
3.5.10 Manual mode
Manual mode switches from working mode to manual mode in the
event of a device fault. In manual mode, the device uses the
following settings:
• Light sources are at medium intensity.
• XY coupling, focus and zoom are inactive.
• Filters are swiveled out.
• The control panel is black.
To continue working in manual mode: