Zeiss MMZ M, Руководство по эксплуатации

Страница: 77 / 154

Preparations for start-up
61211-1270302 MMZ M
6-3
2 Call a ZEISS service engineer if you cannot find or eliminate the
cause.
Setting up the changer rack
Instructions for setting up a changer rack are provided in a separate doc-
ument. See operating instructions for changer racks.
Visual check and check list
The visual check must be part of the routine work to be carried out dur-
ing the daily measuring operation. Before switching the CMM on, make
sure by means of a visual check that the measuring system components
do not show any visible damage.
In case of damage, …
Start-up of the CMM is not allowed in case of damage to the CMM.
1 In this case, protect the CMM against switching on.
—
Switch off the main switch and lock it with a padlock.
— Turn the key-operated switch for the operating mode to the
«OFF» position and withdraw the key.
2 Inform the ZEISS service division.
Housing covers
The CMM may only be operated if all covers are mounted on the CMM
and all doors are closed.
– Mount all housing covers before taking further measures.
Cable for power supply
The cable must be in perfect condition. It must not be bent nor dam-
aged.
– Ensure that no heavy objects are lying on the cable.
Compressed air supply
The compressed air lines and connections must be in perfect condition.
The compressed air line must not be damaged or bent. Furthermore, no
heavy objects may lie on the line. Check whether the following points
apply:
– Make sure that the hoses are in perfect condition.
– Ensure that no heavy objects are lying on the hose.