Zeiss METROTOM 1500 G3, Руководство по эксплуатации, Страница: 57 / 120

Transport
61211-8140502 METROTOM 1500 G3 1.4
5-3
Transport
To be observed on delivery
The CT scanner is delivered disassembled on transport pallets. The indi-
vidual parts are wrapped in insulated packaging. For overseas transport,
the individual parts are packed in shipping containers.
Requirements on the forklift
A forklift with sufficient carrying capacity has to be used for transport.
The forklift must be suitable for the weight of the individual shipping
containers. In order to avoid tilting of the load, the forks must be com-
pletely underneath the transport pallet or shipping container and the
fork width must be variable. You will find the weight and dimensions of
the individual parts in the »Installation Instructions« document.
NOTE
The packaging may not be damaged. The packaging may only be re-
moved at the installation site by a ZEISS service engineer.
Ambient temperature
+5 °C to +40 °C The CT scanner and its components must remain in their packaging and
be stored in a covered area until the machine is installed. The ambient
temperature at the storage area must be b5°C and +40°C.
Transport conditions
The transport route from the storage area to the installation site must be
selected carefully. It might be necessary to prepare it to meet the re-
quirements.
Prerequisites for trans-
port Observe the following for transport:
– Weight: Is the bearing capacity of the floor along the transport
routes suitable for the weight of the shipping containers and the
forklift?
– Dimensions: Are the height and width of the doorways and transport
routes sufficient for the shipping containers and the forklift?
– Forklift: Does the forklift comply with the requirements?