Zeiss METROTOM 1500 G3, Руководство по эксплуатации, Страница: 102 / 120

Inspection measures
9-8
61211-8140502 METROTOM 1500 G3 1.4
Inspection measures
Checking the coolant level
A cooling unit is provided to cool the X-ray tube. The cooling unit is lo-
cated on the controller cabinet. It requires a certain amount of coolant
to work properly. The coolant level needs to be checked every month.
Insufficient cooling if the coolant level is too low.
If the level falls below the minimum mark, sufficient cooling is no longer
guaranteed and there is a risk of air entering the unit. The cooling pump
gets loud and may be destroyed.
1
2
Cooling water pump for the X-ray tube
1 Cooling water pump for the X-ray tube
2 Control cabinet (rear)
NOTE
If you have not concluded any maintenance agreement, you have to
check the coolant level every month.
—
Use a suitable stepladder.
The stepladder must be stable and secured against tipping. The
stepladder should have a holding bow.
NOTE
The coolant of the X-ray tube manufacturer is used. (Order number:
000000-0572-997)