Zeiss LSM 880 Скачать руководство пользователя

Страница: 272 / 690

CHAPTER 1 - SYSTEM OPERATION

ZEISS

Left Tool Area and Hardware Control Tools

LSM 880

266

000000-2071-464

10/2014 V_01

Home and Load positions can also be accessed from the z-position slider by pressing the

buttons.

The z-position can be altered by grapping and sliding the

plane

or by using the arrow slider. The

plane

shows the actual z-position.

Objective

button: The objective can be selected via graphical pop-up menu. Please note, that for FCS

only the C-Apochromat 40x/60x W N1.2 is specified.

Reflector

button: The reflector cube can be selected via graphical pop-up menu.

Tube Lens

button: The tube lens can be selected via graphical pop-up menu.

HBO Reflected Light

Open/Close Shutter

button: The shutter for reflected epi-fluorescent light from

the HBO lamp is switched on and off by repeated pressing. The light path will be highlighted in color.

For transmitted-light observation

•

Switch the HAL lamp on by the

HAL On/Off

button and adjust the light intensity.

•

Activate the condenser function with the

Condenser

button.

•

Press the

Objective

button to swing the required objective for FCS measurements into the working

position.

For Reflected-light Observation (Epi-fluorescence)

•

Turn on the HBO power supply switch.

•

Switch the HBO

Reflected Light Open/Close Shutter

into the Open position.

•

Select the desired filter in the reflector turret by clicking the

Reflector

button. The filter will be

automatically moved into the beam path to enable observation in epi-fluorescence.

•

Select the desired tube lens by clicking the

Tube Lens

button. Normally, the correct lens 1x will be

chosen automatically when the

Locate

tab of the main tool bar is pressed.

•

Swing the required objective for FCS measurements into the working position by selecting the
objective with the

Objective

button. We recommend to use the C-Apochromat 40x/1.2 W corr

because of its optimized optics.

Содержание LSM 880



















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LSM 880

Отзывы:

Похожие инструкции для LSM 880

Бренды по названию

Популярные бренды

Zeiss LSM 880, Руководство по эксплуатации

Результаты поиска

Содержание LSM 880

Отзывы:

Похожие инструкции для LSM 880

Бренды по названию

Популярные бренды