Zeiss LSM 510 Скачать руководство пользователя страница 315

Страница: 315 / 606

LSM 510

OPERATION IN EXPERT MODE

LSM 510 META

Display and Analysis of Images

Carl Zeiss

03/06

B 45-0021 e

4-253

4.13.6

Select - Overlay

This function allows to

−

select from a set of drawing functions such as rectangles and arrows

−

add a scale bar to the image

−

use a set of interactive measurement functions for length, angle and size

4.13.6.1 Functional

Description

The overlay function uses a plane separate from the image plane (the graphics plane) and does therefore
not change the content of the image(s).

The button is only available if the XY or Split XY

Display

functions are selected. Otherwise it is grayed.

Some of the

Display

functions such as

Ortho

Cut

turn the overlay graphics off temporarily.

Any changes done with this function are effective immediately.

The overlay graphics can be stored together with images and can be retrieved from the LSM 5 image
database.

•

Click on the

Overlay

button in the

Select

toolbar.

−

The

Overlay

toolbar will be displayed on the right-hand side of the

Image Display

window.

•

If you click on the

Overlay

button again, the

Overlay

toolbar will be removed.

Provided that the display of the overlay elements has not been deactivated by clicking on the

Off

button,

the created elements will still be displayed in the

Image Display

window even after closing of the

Overlay

toolbar.

Fig. 4-253

Image Display window; Select - Overlay

Содержание LSM 510































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LSM 510

Отзывы:

Похожие инструкции для LSM 510

Бренды по названию

Популярные бренды

Zeiss LSM 510, Руководство пользователя

Результаты поиска

Содержание LSM 510

Отзывы:

Похожие инструкции для LSM 510

Бренды по названию

Популярные бренды