Zeiss LSM 510, Руководство пользователя

Страница: 117 / 606

LSM 510 OPERATION IN EXPERT MODE
LSM 510 META Acquire Menu Carl Zeiss
03/06
B 45-0021 e 4-55
•
Click on the desired configuration.
−
The selected configuration is shown in the first line of the Configurations list box (e.g.:
FITC/Rhod).
•
Click on the Apply button.
−
This results in the stored instrument parameters being taken over for active use. The track
configuration selected before is overwritten.
The optical diagram of the configuration selected appears on the Beam Path and Channel
Assignment panel. The newly loaded track has been automatically activated for the scanning
procedure. The Track Configurations window is closed automatically.
In the Options menu in the function Settings it is possible to define the parameters to be used
when applying a track configuration.
(2) Store a track configuration
A newly created or changed track configuration can be stored under a new name as follows:
•
Click on the Config button, the Track Configurations window appears on the screen.
•
Enter the desired name in the first line of the Configurations list box.
•
Click on the Store button.
•
Close the window by clicking on Close .
During storage via the Store/Apply function, all the data of the Beam Path and Channel Assignment
and the Detector Gain, Ampl. Offset, Ampl. Gain and Data Depth (8 / 12 Bit) scan parameters of the
current track (single tracking) will be stored.
(3) Delete a track configuration
A no longer required track configuration can be deleted as follows:
•
Click on the Config button, the Track Configurations window appears on the screen.
•
Select the configuration to be deleted from the Configurations list box.
•
Click on the Delete button.
•
Close the window by clicking on Close .