2
08/2007
Starting the System
Switching on the LSM system
"
When set to
ON
the REMOTE CONTROL switch
labeled
System/PC
provides power to the
computer. This allows use of the computer and
ZEN software offline (Fig. 1).
"
To completely switch on the system, now press
the
Components
switch to
ON
. This starts the
other components and the complete system is
ready to be initialized by the ZEN software.
Switching on the X-Cite 120 or the HBO
100 mercury lamp
"
Switch on the main switch of the X-Cite 120 /
HBO 100 lamp for reflected light illumination
via the power supply as described in the
respective operating manual.
Switching on the Enterprise UV-Ar Laser
"
If the UV laser is required, switch it on via the
toggle switch (Fig. 2/
1
) on the power supply.
!
It will be ready for operation after a few
seconds.
Fig. 1
REMOTE CONTROL switch
Fig. 2
Power supply of UV-Ar laser