OPERATING INSTRUCTIONS
ZEISS
System Operation
Lattice Lightsheet 7
76
000000-2324-960
04/2021 V_01
3.2.2
Sample Positioning and Finding
1.
Switch on the white LED lamp and set it to 20-
50%. (Do not use side illumination as you will
lose contrast (Fig. 58).
2.
Use
None
position in the filter wheel.
3.
Use 2048 x 2048 camera ROI.
4.
Set camera integration time to 5 ms.
5.
Press
Continuous
.
You will see an image with a sharp band.
Fig. 58
Imaging Setup tab
6.
Use the Ergopointer or the Stage Control Tab to
focus the sample so that the sharp band is
centered around the crosshair Fig. 59.
Fig. 59
Transmitted image centered