Zeiss INTRABEAM, Инструкция по эксплуатации

Страница: 14 / 82

Safety measures INTRABEAM Water Phantom
Version 6.2
Page 14 G-30-1767-en
Safety during
the measurement
• Above all, please observe the safety instructions on radiation protection in
the Instructions for Use of your INTRABEAM (INTRABEAM 600).
If the XRS 4 is properly seated in the XRS mount of the rotary feedthrough (for
rotary feedthrough, see page 20), the optical interlock system closes and
permits the generation of X-rays. The INTRABEAM generates X-radiation only
when the XRS 4 is activated.
The internal radiation monitoring system (IRM) detects the radiation emitted
during the measurement. When X-ray radiation is generated, an audible
acoustic signal is emitted from the loudspeaker of the control unit (CC 600)
and the external warning lamp lights up.
The status of the interlock system is always displayed in the "Treatment"
window, see the "Interlock Status" display.
Appropriate radiation protection is required:
Before performing a measurement, you must ensure that the XRS 4 is properly
seated in the rotary feedthrough and that all covers and radiation protection
shields of the water tank are properly attached.